White Rodgers 1F97-71 manual How can I permanently change a part of my program?

Page 33

QUESTIONS AND ANSWERS

1.How can I permanently change a part of my program?

Press PRGMVIEW and ADVDAY until you reach the time/

temperature schedule you want. Then press

TIMEFWD or BACKTIME and and to change

the program. See PROGRAMMING YOUR THERMOSTAT.

2.How can I have no change in temperature from one time period to another?

Simply select the same temperature for each consecutive time period. For example, you may select the same COOL A temperature for period 2 as you did for period 1, which means the temperature will not change from COOL A when period 2 begins. See PROGRAMMING YOUR THERMOSTAT.

3.How can I finish my programming if the display has already changed to time/tem- perature?

During programming, if no buttons are pressed for five minutes, the thermostat will enter the HOLD mode and maintain a constant tem- perature. The display will change to the time/ temperature mode. To resume programming,

press PRGMVIEW and ADVDAY until you return to the

point where you stopped programming. Then you may continue to program the thermostat normally. If you want to stop programming at

this point, press RUN to start the normal

PRGM

program function. See PROGRAMMING YOUR THERMOSTAT.

33

Image 33

Contents 1F97-71 About Your New Thermostat Your NEW Thermostats Set Current Time and DayProgramming Your Your NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features To set the thermostat to Auto PressTWO Hour Temperature Override Auto Changeover Switch PositionsConvertibility Press Timefwd Selected setting until you press RUN toTime. To set cooling anticipation, press Clock Too long, press Backtime to decrease the cycleProgramming Programming Your Thermostat Total Keypad Lockout Switch PositionsPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Press Clock once. The display will show Minutes only Set Current Time and DayHeating/Cooling Schedule Plan Sample After this happens, press Prgmview until you are at Select Heating and Cooling TemperaturesPress Prgmrun to resume program operation Until Heat is displayedPress View once. The display will show Press PrgmrunProgram Heating/Cooling Times Heating Temperatures Press Prgmview once. MON, the abbreviation forUntil PRG Tures, press Prgmrun Any other day see Using the HOLD/COPY ButtonProgram Cooling Temperatures PressBefore Reattaching the THERMO- Stat to the Subbase Using the HOLD/COPY Button Begin program operationComplete until Copyhold has been pressed twice Press Copyhold once. Copy will appear on Check Your ProgrammingTion mode you want HEAT, COOL, AUTO. Press Thermostat to subbase. Turn on power to System. Then pressPress Prgmview and Advday until you return to How can I permanently change a part of my program?This point, press RUN to start the normal Program function. See Programming Your ThermostatGramming Your Thermostat Why can’t I program the thermostat in the Auto mode?Programmed fan, press MostatImmediately, press Then pressAting Your Thermostat Display is flashing BATTERY. What does this mean? ING Your ThermostatThermostat beeps every few minutes. What does this mean? See Operating Your Thermostat Why is the system turning on and off so frequently seldom? Any time you wish to turn your system off Simply pressBack on, press Maintains programming, press OFF is displayed, put the thermostat back on Wall, pressMing Your Thermostat Part No -5100A