White Rodgers 1F97-71 manual Your NEW THERMOSTAT’S Features

Page 4

YOUR NEW THERMOSTAT’S FEATURES

•Seven independent day programming

•Simultaneous heat and cool program storage

•Four separate time/temperature settings per 24-hour period

•Computed Energy Management Recovery (EMR)

•Automatic changeover (operator-selectable)

•Armchair programming capability

•Backlit LCD displays continuous set point, time, and room temperature

•1.5 volt "AA" Energizer® alkaline battery backup

•Preprogrammed temperature control

•Adjustable cycle times

•Compressor short cycle protection

•Programmable blower control

•Blower delay in the cooling cycle

•Audio and visual prompting during operation

•Two hour temperature override

•Manual program override (HOLD tempera- ture)

•°F/°C convertibility

•Keypad lockout (operator-selectable)

•Temperature range 40° to 99°F

•Compatible with Remote Sensor (installer- selectable)

4

Image 4

Contents 1F97-71 About Your New Thermostat Set Current Time and Day Your NEW ThermostatsProgramming Your Your NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features Press To set the thermostat to AutoAuto Changeover Switch Positions TWO Hour Temperature OverrideSelected setting until you press RUN to Convertibility Press TimefwdToo long, press Backtime to decrease the cycle Time. To set cooling anticipation, press ClockProgramming Total Keypad Lockout Switch Positions Programming Your ThermostatPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Set Current Time and Day Press Clock once. The display will show Minutes onlyHeating/Cooling Schedule Plan Sample Select Heating and Cooling Temperatures After this happens, press Prgmview until you are atPress Prgmrun to resume program operation Until Heat is displayedPress Prgmrun Press View once. The display will showPress Prgmview once. MON, the abbreviation for Program Heating/Cooling Times Heating TemperaturesUntil PRG Any other day see Using the HOLD/COPY Button Tures, press PrgmrunPress Program Cooling TemperaturesBefore Reattaching the THERMO- Stat to the Subbase Begin program operation Using the HOLD/COPY ButtonComplete until Copyhold has been pressed twice Check Your Programming Press Copyhold once. Copy will appear onThermostat to subbase. Turn on power to System. Then press Tion mode you want HEAT, COOL, AUTO. PressHow can I permanently change a part of my program? Press Prgmview and Advday until you return toThis point, press RUN to start the normal Program function. See Programming Your ThermostatWhy can’t I program the thermostat in the Auto mode? Gramming Your ThermostatProgrammed fan, press MostatThen press Immediately, pressAting Your Thermostat ING Your Thermostat Display is flashing BATTERY. What does this mean?Thermostat beeps every few minutes. What does this mean? See Operating Your Thermostat Any time you wish to turn your system off Simply press Why is the system turning on and off so frequently seldom?Back on, press OFF is displayed, put the thermostat back on Wall, press Maintains programming, pressMing Your Thermostat Part No -5100A