White Rodgers 1F97-71 Select Heating and Cooling Temperatures, Until Heat is displayed, Press

Page 25

SET

3. Press CLOCK once. The display window will

show the hour only.

EXAMPLE:

4.Press and hold either TIMEFWD or BACKTIME until you

reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).

SET

5. Press CLOCK once. The display will show the

day of the week as an abbreviation (MON for Monday, TUE for Tuesday, etc.).

6. Press and hold either TIMEFWD or BACKTIME until you

reach the current day of the week.

7. Press PRGMRUN once. The display will show the

correct time and room temperature alternately.

Select Heating and Cooling Temperatures

During programming, if you don’t press any but- tons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant tempera- ture. The display will revert to the alternating time/ temperature display. To resume programming

after this happens, press PRGMVIEW until you are at the

point where you stopped programming. Then you may continue to enter your programs normally. If you want to stop programming at any time, simply

press PRGMRUN to resume program operation.

1.	Press	SYSTEM	until HEAT is displayed.
		SWITCH
2.	Press	TEMPVIEW once. The display will continue to

show HEAT. Below HEAT is the letter A, representing the first programmed heating

25

Image 25

Contents 1F97-71 About Your New Thermostat Set Current Time and Day Your NEW ThermostatsProgramming Your Your NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features To set the thermostat to Auto PressTWO Hour Temperature Override Auto Changeover Switch PositionsConvertibility Press Timefwd Selected setting until you press RUN toTime. To set cooling anticipation, press Clock Too long, press Backtime to decrease the cycleProgramming Programming Your Thermostat Total Keypad Lockout Switch PositionsPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Press Clock once. The display will show Minutes only Set Current Time and DayHeating/Cooling Schedule Plan Sample After this happens, press Prgmview until you are at Select Heating and Cooling TemperaturesPress Prgmrun to resume program operation Until Heat is displayedPress View once. The display will show Press PrgmrunPress Prgmview once. MON, the abbreviation for Program Heating/Cooling Times Heating TemperaturesUntil PRG Tures, press Prgmrun Any other day see Using the HOLD/COPY ButtonPress Program Cooling TemperaturesBefore Reattaching the THERMO- Stat to the Subbase Begin program operation Using the HOLD/COPY ButtonComplete until Copyhold has been pressed twice Press Copyhold once. Copy will appear on Check Your ProgrammingTion mode you want HEAT, COOL, AUTO. Press Thermostat to subbase. Turn on power to System. Then pressPress Prgmview and Advday until you return to How can I permanently change a part of my program?This point, press RUN to start the normal Program function. See Programming Your ThermostatGramming Your Thermostat Why can’t I program the thermostat in the Auto mode?Programmed fan, press MostatThen press Immediately, pressAting Your Thermostat ING Your Thermostat Display is flashing BATTERY. What does this mean?Thermostat beeps every few minutes. What does this mean? See Operating Your Thermostat Any time you wish to turn your system off Simply press Why is the system turning on and off so frequently seldom?Back on, press OFF is displayed, put the thermostat back on Wall, press Maintains programming, pressMing Your Thermostat Part No -5100A