Operating Features

Now that you are familiar with the thermostat display and buttons, read the following informa- tion to learn about the many features of the thermostat.

•COMPUTED ENERGY MANAGEMENT RECOVERY (EMR) — The thermostat’s microcomputer can be set to automatically calculate the time it will take to change the temperature to the next program setting. Then the thermostat will activate the heat- ing or cooling system to change the tem- perature so that the desired temperature is reached at the beginning of the next pro- gram period. As an example of this feature, assume that you have programmed your

thermostat to provide an overnight heating temperature of 62°F, and that during the next program period, beginning at 6:00 AM,

you have programmed a temperature of 70°F. The thermostat will automatically ac- tivate the heating system at 5:00 AM, so that the programmed 70°F temperature is reached by about 6:00 AM.

The thermostat is configured at the factory so that this feature is disabled. If you wish to have this feature, refer to the installation instructions for this thermostat, or contact your local heating/cooling contractor.

•TWO HOUR TEMPERATURE OVERRIDE

— Press or until the display shows the temperature you want. The ther- mostat will override current programming and keep the room temperature at the se- lected temperature for two hours. After two hours, the thermostat will automatically re- vert to the program.