White Rodgers 1F97W-51 manual Using the HOLD/COPY Button

Page 28

run continuously during this period, press

FAN until PRG FAN is displayed.

ON - AUTO

5.Repeat step 4 for Monday’s heating cooling periods 3 and 4.

6. Use the HOLDCOPY button, or press ADVDAY to choose other days to program. Remember, once you enter Monday’s program, Monday’s pro- gram is automatically copied into Tuesday’s through Sunday’s programs.

7.After you enter or copy heating and cooling programs for all seven days, press PRGMRUN to begin program operation.

Using the HOLD/COPY Button

You can use the button to copy any day’s entire heating/cooling program into any other day’s program. However, you must perform each copy function separately. Each time you begin a COPY operation, you must start with the day’s program you wish to copy FROM. A COPY

operation is not complete until HOLDCOPY has been pressed twice.

NOTE

For most efficient programming, you should enter both the heating and cooling programs for the day you wish to copy FROM before using the COPY function, since the COPY function copies the entire day’s programming to other days.

1. Press PRGMVIEW once.

28

Image 28
Contents 1F97W-51 About Your New Thermostat Questions and Answers Your NEW THERMOSTAT’SOperating Your Thermostat Programming YourYour NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyUse To turn thermostat OFF beDisplay System Thermostat Buttons 11 12 Operating Features TWO Hour Temperature OverrideConvertibility Press Time Buttons to adjust anticipation. Press Press ClockAt the same time To return to your programReturn of power after a power outage Pressing Programming Your Thermostat Your Home Factory Preprogramming Chart Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Heating/Cooling Schedule Plan Sample Entering Your Program Set Current Time and DaySelect Heating and Cooling Temperatures Gramming after this happens, press Prgmview untilProgram Heating/Cooling Times Heating Temperatures On Auto Thermostat has a built-in Copy feature Using the HOLD/COPY ButtonProgram Cooling Temperatures Sure to PressUntil OFF is Displayed Before Reattaching the Thermostat to the SubbaseUsing the HOLD/COPY Button Check Your Programming Until OFF is displayed. Reattach Until you reach Programming Your ThermostatProgramming, press Prgm UntilErating Your Thermostat What can cause the thermostat display to freeze or go blank?Display is flashing BATTERY. What does this mean? Thermostat beeps every few min- utes. What does this mean? Gramming Your Thermostat See Operating Your THERMO- StatWhy is the system turning on and off so frequently seldom? Ating Your ThermostatMing Your Thermostat Page Page Part No -5094B