7.Press PRGMRUN once. The display will show the correct time and room temperature alter- nately.
Select Heating and Cooling Temperatures
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume pro-
gramming after this happens, press PRGMVIEW until
you are at the point where you stopped program- ming. Then you may continue to enter your programs normally. If you want to stop program-
ming at any time, simply press PRGMRUN to resume program operation.
1. Press | SYSTEM | until HEAT is displayed. |
HEAT - OFF - COOL |
2.Press TEMPVIEW once. The display will continue to show HEAT. Below HEAT is the letter A, representing the first programmed heating temperature (HEAT A). At the right of the display is the currently programmed HEAT A setting.
3.Press either 
or 
to change the temperature to your selected HEAT A set- ting. (If you only want to program a tempera- ture for HEAT A, skip to step 7.)
4. Press TEMPVIEW once. The letter A will change to the letter B, representing HEAT B.
5.Press either 
or 
to change the temperature to your selected HEAT B setting
23