White Rodgers 1F97W-51 manual Entering Your Program, Set Current Time and Day

Page 22

ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling program you have selected.

We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). Fresh “AA” Ener- gizer® alkaline batteries must be installed to per- form off-wall programming. BE SURE SYSTEM

SWITCH IS SET TO OFF POSITION BEFORE REATTACHING THERMOSTAT TO SUBBASE!

Set Current Time and Day

1.

Press CLOCK once. The display will show

 

SET

 

minutes only.

 

EXAMPLE:

2.

Press and hold either TIMEFWD or BACKTIME until you

 

reach the correct minutes.

3. Press SET once. The display window will

CLOCK

show the hour only.

EXAMPLE:

4. Press and hold either TIMEFWD or BACKTIME until you reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).

5.Press CLOCKSET once. The display will show the day of the week as an abbreviation (MON for Monday, TUE for Tuesday, etc.).

6. Press and hold either TIMEFWD or BACKTIME until you reach the current day of the week.

22

Image 22
Contents 1F97W-51 About Your New Thermostat Operating Your Thermostat Questions and AnswersYour NEW THERMOSTAT’S Programming YourYour NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyUse To turn thermostat OFF beDisplay System Thermostat Buttons 11 12 Operating Features TWO Hour Temperature OverrideConvertibility Press Time At the same time Buttons to adjust anticipation. PressPress Clock To return to your programReturn of power after a power outage Pressing Programming Your Thermostat Your Home Factory Preprogramming Chart Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Heating/Cooling Schedule Plan Sample Entering Your Program Set Current Time and DaySelect Heating and Cooling Temperatures Gramming after this happens, press Prgmview untilProgram Heating/Cooling Times Heating Temperatures On Auto Thermostat has a built-in Copy feature Using the HOLD/COPY ButtonUntil OFF is Program Cooling TemperaturesSure to Press Displayed Before Reattaching the Thermostat to the SubbaseUsing the HOLD/COPY Button Check Your Programming Until OFF is displayed. Reattach Programming, press Prgm Until you reachProgramming Your Thermostat UntilErating Your Thermostat What can cause the thermostat display to freeze or go blank?Display is flashing BATTERY. What does this mean? Thermostat beeps every few min- utes. What does this mean? Gramming Your Thermostat See Operating Your THERMO- StatWhy is the system turning on and off so frequently seldom? Ating Your ThermostatMing Your Thermostat Page Page Part No -5094B