White Rodgers 1F97W-51 manual Program Cooling Temperatures, Sure to Press, Until OFF is

Page 27

Program Cooling Temperatures

!CAUTION

If outside temperature is below 50°F, we recommend that you remove the ther- mostat from the wall before proceeding with the following steps to program cool- ing temperatures. Personal injury and/or property damage could result from air conditioner compressor slugging. Fresh “AA” alkaline batteries (such as Ener- gizer® brand) must be installed to per- form off-wall programming. Program- ming away from the wall should prevent accidental compressor operation. BE

SURE TO PRESS

SYSTEM

UNTIL OFF IS

HEAT - OFF - COOL

DISPLAYED BEFORE REATTACHING THE THERMOSTAT TO THE SUBBASE!

1.To program cooling temperatures for the heating/cooling periods you have already

set, press

SYSTEM

until COOL is displayed.

HEAT - OFF - COOL

2. Press VIEW once. The Monday heating/

PRGM

cooling period 1 start time you programmed earlier will be displayed, along with the currently programmed COOL A, B, C, or D temperature.

3.Press or to display the COOL A, B, C, or D temperature you want for Monday’s heating/cooling period 1. If you want the fan to run continuously during this period, press

ON - AUTO

until PRG FAN is displayed.

 

FAN

 

 

 

4. Press

PRGMVIEW , then press

or

to

select Monday’s COOL A, B, C, or D tem- perature for period 2. If you want the fan to

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 1F97W-51 About Your New Thermostat Programming Your Questions and AnswersYour NEW THERMOSTAT’S Operating Your ThermostatYour NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatTo turn thermostat OFF be UseDisplay System Thermostat Buttons 11 12 TWO Hour Temperature Override Operating FeaturesConvertibility Press Time To return to your program Buttons to adjust anticipation. PressPress Clock At the same timeReturn of power after a power outage Pressing Programming Your Thermostat Your Home Factory Preprogramming Chart Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Heating/Cooling Schedule Plan Sample Set Current Time and Day Entering Your ProgramGramming after this happens, press Prgmview until Select Heating and Cooling TemperaturesProgram Heating/Cooling Times Heating Temperatures On Auto Using the HOLD/COPY Button Thermostat has a built-in Copy featureDisplayed Before Reattaching the Thermostat to the Subbase Program Cooling TemperaturesSure to Press Until OFF isUsing the HOLD/COPY Button Check Your Programming Until OFF is displayed. Reattach Until Until you reachProgramming Your Thermostat Programming, press PrgmWhat can cause the thermostat display to freeze or go blank? Erating Your ThermostatDisplay is flashing BATTERY. What does this mean? Thermostat beeps every few min- utes. What does this mean? See Operating Your THERMO- Stat Gramming Your ThermostatAting Your Thermostat Why is the system turning on and off so frequently seldom?Ming Your Thermostat Page Page Part No -5094B
Top Page Image Contents