White Rodgers 1F97W-51 manual Thermostat Buttons

Page 10

The Thermostat Buttons

7Sets the system mode (HEATing, OFF, or COOLing).

8Selects fan operation (see #6, above). This button is also used to program the fan to run continuously during a program period.

9Runs display forward or backward through time, day, or anticipation settings during programming.

10 Used with TIMEFWD and BACKTIME to set current time and day of the week.

11Used during programming to set the day of the week to be programmed. Also used with CLOCKSET to enter anticipation setting mode.

12 Used to initiate or review thermostat pro- gramming.

13 Used to select heating and cooling tem- peratures to be programmed.

14Used to manually override programming to hold at a selected temperature (when HOLD is displayed). Also used to copy one day’s programming into another (when COPY is displayed).

15Used to start program operation after pro- gramming. Also used to return thermostat to program operation after being in HOLD mode.

16(Red arrow) Raises temperature setting (99°F or 37°C maximum).

10

Image 10

Contents 1F97W-51 About Your New Thermostat Operating Your Thermostat Questions and AnswersYour NEW THERMOSTAT’S Programming YourYour NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyUse To turn thermostat OFF beDisplay System Thermostat Buttons 11 12 Operating Features TWO Hour Temperature OverrideConvertibility Press Time At the same time Buttons to adjust anticipation. PressPress Clock To return to your programReturn of power after a power outage Pressing Programming Your Thermostat Your Home Factory Preprogramming Chart Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Heating/Cooling Schedule Plan Sample Entering Your Program Set Current Time and DaySelect Heating and Cooling Temperatures Gramming after this happens, press Prgmview untilProgram Heating/Cooling Times Heating Temperatures On Auto Thermostat has a built-in Copy feature Using the HOLD/COPY ButtonUntil OFF is Program Cooling TemperaturesSure to Press Displayed Before Reattaching the Thermostat to the SubbaseUsing the HOLD/COPY Button Check Your Programming Until OFF is displayed. Reattach Programming, press Prgm Until you reachProgramming Your Thermostat UntilErating Your Thermostat What can cause the thermostat display to freeze or go blank?Display is flashing BATTERY. What does this mean? Thermostat beeps every few min- utes. What does this mean? Gramming Your Thermostat See Operating Your THERMO- StatWhy is the system turning on and off so frequently seldom? Ating Your ThermostatMing Your Thermostat Page Page Part No -5094B