White Rodgers 1F97W-51 Until you reach, Programming Your Thermostat, Programming, press Prgm

Page 31

QUESTIONS AND ANSWERS

1.How can I permanently change a part of my program?

Press PRGM and	DAY	until you reach the
VIEW	ADV

time/temperature schedule you want. Then

press FWD	or BACK and	or	to
TIME	TIME

change the program. See PROGRAMMING YOUR THERMOSTAT.

2.How can I have no change in tempera- ture from one time period to another?

Simply select the same temperature for each consecutive time period. For example, you may select the same COOL A tempera- ture for period 2 as you did for period 1, which means the temperature will not change

from COOL A when period 2 begins. See

PROGRAMMING YOUR THERMOSTAT.

3.How can I finish my programming if the display has already changed to time/ temperature?

During programming, if no buttons are pressed for five minutes, the thermostat will enter the HOLD mode and maintain a con- stant temperature. The display will change to the time/temperature mode. To resume

programming, press PRGM and	DAY	until
VIEW	ADV

you return to the point where you stopped programming. Then you may continue to program the thermostat normally. If you want to stop programming at this point,

31

Image 31

Contents 1F97W-51 About Your New Thermostat Programming Your Questions and AnswersYour NEW THERMOSTAT’S Operating Your ThermostatYour NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatTo turn thermostat OFF be UseDisplay System Thermostat Buttons 11 12 TWO Hour Temperature Override Operating FeaturesConvertibility Press Time To return to your program Buttons to adjust anticipation. PressPress Clock At the same timeReturn of power after a power outage Pressing Programming Your Thermostat Your Home Factory Preprogramming Chart Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Heating/Cooling Schedule Plan Sample Set Current Time and Day Entering Your ProgramGramming after this happens, press Prgmview until Select Heating and Cooling TemperaturesProgram Heating/Cooling Times Heating Temperatures On Auto Using the HOLD/COPY Button Thermostat has a built-in Copy featureDisplayed Before Reattaching the Thermostat to the Subbase Program Cooling TemperaturesSure to Press Until OFF isUsing the HOLD/COPY Button Check Your Programming Until OFF is displayed. Reattach Until Until you reachProgramming Your Thermostat Programming, press PrgmWhat can cause the thermostat display to freeze or go blank? Erating Your ThermostatDisplay is flashing BATTERY. What does this mean? Thermostat beeps every few min- utes. What does this mean? See Operating Your THERMO- Stat Gramming Your ThermostatAting Your Thermostat Why is the system turning on and off so frequently seldom?Ming Your Thermostat Page Page Part No -5094B