Install the Mesh | Heat & Glo LifeStyle SLR-B (COSMO) guide

F. Fixed Glass Assembly

WARNING! Risk of Asphyxiation! Handle ﬁxed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.

•DO NOT strike, slam or scratch glass.

•DO NOT operate ﬁreplace with glass removed, cracked, broken or scratched.

•Replace as a complete assembly.

Removing Fixed Glass Assembly

1.Remove the decorative front.

2.Locate the two spring latches that are on the upper left and right of the ﬁ replace.

3.Use both index ﬁ ngers to release spring latches. See Figure 14.5.

4.Allow glass to tilt forward. Grasp glass on the upper right and left sides and lift glass “up” and “out.”

Replacing Fixed Glass Assembly

1.Locate glide tabs on lower left and right corners.

2.Grasp glass on upper right and left sides and tilt bot- tom of glass assembly toward ﬁ replace.

3.Allow of the bottom gasketing of the glass assembly to touch the face of the ﬁ replace.

4.Put pressure on the glass as you allow the glass assembly to drop into the two lower glass clips. See Figure 14.5.

5.Tilt top of glass towards ﬁ replace and engage both top spring latches

G. Install the Mesh

The mesh front is included with the Tonic front. The Mar- tini tinted glass front does not include mesh.

1.Remove ﬁ xed glass assembly as instructed.

2.Place glass assembly into mesh screen such that the four mesh clips attached to the mesh assembly snap into the four corresponding slots on the ﬁ xed glass as- sembly.

H. Air Shutter Setting

Air shutter settings may be adjusted by a qualiﬁ ed install- er at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for longer vertical runs. See Figure 14.6.

•Loosen the 1/4 in. screw.

•Twist shutter to adjust

•Shutter may be open for longer horizontal vent runs.

•Do not close the air shutter more than 1/16 in. for NG or 5/16 in. for LP.

•Tighten the screw.

NOTICE: If the ﬂames appear to be orange, open the air shutter to prevent residue buildup on the glass.

UPPER SPRING LATCH LOWER GLASS CLIP

Figure 14.6 Air Shutter

Air Shutter Settings

	NG	LP
SLR-B	1/16 in.	5/16 in.

Figure 14.5 Fixed Glass Assembly

Heat & Glo • SLR-B • 2195-900 Rev. P • 12/11

SLR-B (COSMO) specifications

The Heat & Glo LifeStyle SLR-B (COSMO) is a revolutionary gas fireplace that embodies modern design while prioritizing efficiency and sophistication. Known for its sleek lines and contemporary aesthetic, the SLR-B blends seamlessly into various home décors, making it a popular choice among homeowners who value both style and functionality.

One of the standout features of the SLR-B is its panoramic viewing glass. The expansive front glass panel offers an unobstructed view of the flames, creating a stunning focal point in any room. This design not only enhances the ambiance but also allows for a more radiant heat output, efficiently warming the space while inviting a captivating visual element into the home.

The SLR-B utilizes advanced burner technology, which ensures a clean and efficient burn, producing realistic flames that mimic the look of natural wood fires. The unique firebox design enhances combustion efficiency, maximizing heat output while minimizing emissions. This aligns with modern environmental standards and provides homeowners with peace of mind regarding their energy consumption.

Compatibility with home automation systems is another attractive aspect of the SLR-B. With options for remote control and smart technology integration, users can control the fireplace settings from anywhere in the home, providing convenience and comfort. The inclusion of adjustable flame height adds personalization, allowing users to create the ideal atmosphere based on their preferences.

Safety is paramount in the design of the SLR-B. The fireplace comes with a sealed combustion system, which prevents drafts and enhances indoor air quality by minimizing the infiltration of outside air. Additionally, an intuitive control system informs users of the fireplace's status and ensures the right operation settings, contributing to a safer user experience.

With customizable media options, including various decorative stones or logs, the SLR-B allows for personal expression, harmonizing the design with individual tastes. This versatility makes it suitable for diverse spaces, from modern apartments to traditional homes.

In summary, the Heat & Glo LifeStyle SLR-B (COSMO) combines cutting-edge technology with aesthetic appeal. Its panoramic design, eco-friendly combustion, smart technology integration, safety features, and customizable options make it a top choice for homeowners seeking a sophisticated heating solution that enhances their living spaces.