20
CLEANING AND MAINTENANCE
Cleaning Burner Injector Holder and Pilot Air Inlet Hole (Cont.) Logs
WIRING DIAGRAM
SPECIFICATIONS
CLEANING AND
MAINTENANCE
Continued
Injector Holder
Ports/Slots
Burner
Tube
Primary Air
Inlet Holes
Figure 42 - Injector Holder On Outlet Burner Tube
Ports/Slots
Burner
Tube
Pilot
Assembly
Pilot Air
Inlet Hole
Figure 43 - Pilot Inlet Air Hole
LOGS
•If you remove logs for cleaning, refer to Installing Logs, pages 14 and 15, to properly replace logs.
•Replace log(s) if broken or chipped
WIRING DIAGRAM
Note: For proper operation of optional accessories, the wires from the switch to the control must be connected exactly as shown.
A |
|
UT | |
O | |
OF | |
ON | F |
|
Thermopile
SPECIFICATIONS
MODELS EFS33NR, EFS33NRA, VSGF33NR, and VSGF33NRA
Btu (Variable) | 20,000/33,000 |
Type Gas | Natural Gas Only |
Ignition | Piezo |
Pressure Manifold | 3.5" W.C. |
Inlet Gas Pressure (in. of water) |
|
Maximum | 10.5" |
Minimum* | 5" |
Shipping Weight | 122 lbs. |
* For input adjustment |
|
MODELS EFS33PR, EFS33PRA, VSGF33PR, and VSGF33PRA
Btu (Variable) | 20,000/33,000 |
Type Gas | Propane/LP Only |
Ignition | Piezo |
Pressure Manifold | 7.9" W.C. |
Inlet Gas Pressure (in. of water) |
|
Maximum | 13" |
Minimum* | 11" |
Shipping Weight | 122 lbs. |
* For input adjustment |
|
Forvisit..com