Vermont Casting 3032 Install ON/OFF Switch, Vermont Castings UVS27 Vent-FreeGas Heater, 20005004

Vermont Castings UVS27 Vent-Free Gas Heater

	Upper
	Flange
	ST344
Fig. 10	Place upper flange behind lower edge of shroud.

	ST345
Fig. 11	Correct position of fan skirt installation.
	ST346
Fig. 12	Attach snapstat to inner shroud.

Retaining Nut

Rheostat	Control Knob
	FK104

Fig. 13 Attach rheostat to bracket.

MOTOR
BLK	BLK	BLK
		SNAPSTAT
WHT	BLK	WHT
	GRN	RHEOSTAT
		ON/OFF

ST236

Fig. 14 Fan wiring diagram.

Install ON/OFF Switch

The switch assembly parts are found in the parts bag.

1.Attach switch assembly to left rear side of stove shroud using two screws and existing holes in shroud. (Fig. 15)

2.Run wires down back of stove, under bottom of rear shroud to valve.

3.Attach wires to valve terminals. (Fig. 16)

Switch

AssemblyExisting Holes

Screws	ST315
Fig. 15 Attach switch assembly to rear shroud.
TH
TP
TPTH
	ST228

Fig. 16 Attach switch wires to valve.

20005004 11