Vermont Casting 3032, 3033, 3030, 3031 manual Installation & Operating Instructions, 20005004

Page 3
Installation & Operating Instructions

Vermont Castings UVS27 Vent-Free Gas Heater

Installation & Operating Instructions

In order to ensure safe and effective installation, this unit must be installed only by a qualified agency, individual, firm, corporation or company that is experienced in the installa- tion, repair and servicing of this type of appliance and is familiar with the building codes and installation techniques appropriate in your area. Contact your hearth products dealer or local gas supplier for the name of a qualified service person.

IMPORTANT: Read this owner's manual carefully and completely before trying to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from burns, fire, explo- sion, electrical shock, and carbon monoxide poisoning.failure to follow instructions may result in property damage, bodily injury or loss of life. This manual contains important user information. Keep this manual with the heater after installation is complete.

FOR SAFE INSTALLATION AND OPERATION, PLEASE NOTE THE FOLLOWING:

1.Use only Natural Gas with UVS27RN/MN. Use only Propane with UVS27RP/MP. Do not use any other fuels.

2.Install only in accordance with the National Fuel Gas Code, ANSIZ223.1/NFPA54-latest edition. (Exception: Do not derate this appliance for altitude. This appliance has been tested and listed for use in altitudes up to 10,000 feet.)

3.Use only the installation instructions provided by the manufacturer for this appliance. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compart- ments, burners and circulating air passageways of the appliance be kept clean.

4.Warning: Any change to this heater or its controls can be dangerous. DO NOT make modifications to any heater or associated parts.

5.DO NOT install this heater in a bedroom or bath- room.

6.Due to high surface temperatures, DO NOT install this heater

in a recreational vehicle,

where curtains, furniture, clothing or other flammable objects are less than 36 inches from the front, top or sides of the heater,

in high traffic areas,

in windy or drafty areas.

7.DO NOT place clothing or other flammable mate- rial on or near the appliance.

8.DO NOT obstruct the top grille at all. Doing so will cause high levels of carbon monoxide that will lead to death.

CARBON MONOXIDE POISONING

MAY LEAD TO DEATH!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have the heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

9.This heater needs fresh, outside air ventilation to operate properly. See Fresh Air Requirements on pages 6 and 7.

10.If heater shuts off, heater may not have enough fresh air ventilation. Provide more fresh air. If heater keeps shutting off, refer to Troubleshoot- ing.

11.DO NOT operate this heater

where flammable liquids or vapors are used or stored

under dusty conditions.

12.The heater becomes very hot when operating. Alert children and adults to stay away from hot surfaces to avoid burns or clothing ignition. The heater will remain hot for a time after shutdown. Allow surface to cool before touching.

13.Carefully supervise young children when they are in the room with the heater.

14.Do not use the heater if any part has been ex- posed to or under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

15.DO NOT operate the heater if any log is broken or damaged.

16.Turn heater off and let cool before servicing. Only a qualified service person should service and repair heater.

17.DO NOT operate this appliance with the safety screen removed. If the safety screen is removed from the appliance for service or cleaning, it must be replaced before operating the heater.

NOTE: If any of the original wire as supplied with the appliance must be replaced, it must be replaced with a wire of at least 105°F temperature rating.

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

20005004

3

Image 3
Contents INSTALLER / CONSUMER SAFETY INFORMATION Homeowner’s InstallationWHATTO DO IF YOU SMELL GAS Do not try to light any appli- anceTable Of Contents Vermont Castings UVS27 Vent-FreeGas Heater20005004 Installation & Operating Instructions Vermont Castings UVS27 Vent-FreeGas Heater20005004 Freestanding Stove Shell DimensionsVermont Castings UVS27 Vent-FreeGas Heater 20005004Vermont Castings UVS27 Vent-FreeGas Heater Clearance RequirementsMinimum Clearances to Combustible Materials Hearth RequirementsANSI Z21.11.2a-2001 Unvented Heaters Gas SpecificationsGas Inlet and Manifold Pressures UVS27R & UVS27M Vent-Free Certified toProvide For Adequate Ventilation Vent Free FeaturesFresh Air Requirements for Combustion and Ventilation20005004 W A R N I N GVermont Castings UVS27 Vent-FreeGas Heater W A R N I N GVermont Castings UVS27 Vent-FreeGas Heater Assembly ProceduresShell / Firebox Assembly Unpack the FireboxInstall Optional Fan Kit Vermont Castings UVS27 Vent-FreeGas Heater20005004 Install ON/OFF Switch Vermont Castings UVS27 Vent-FreeGas Heater20005004 20005004 Glass & Catalyst InstallationThermostat Connection Optional Vermont Castings UVS27 Vent-FreeGas HeaterConnect the Gas Supply Line Vermont Castings UVS27 Vent-FreeGas Heater20005004 Install Log Set Vermont Castings UVS27 Vent-FreeGas Heater20005004 Complete the Installation Vermont Castings UVS27 Vent-FreeGas Heater20005004 Your First Fire Flame & Temperature AdjustmentFlame Characteristics OperationTo Turn Off Gas To Heater FOR YOUR SAFETY READ BEFORE LIGHTINGLighting and Operating Instructions Lighting InstructionsVermont Castings UVS27 Vent-FreeGas Heater TroubleshootingCONDITION POSSIBLE CAUSEPOSSIBLE CAUSE Troubleshooting cont’dVermont Castings UVS27 Vent-FreeGas Heater CONDITIONGlass Replacement MaintenanceFirebox Cleaning and Inspection Cleaning ProcedureReplace The Combustor Module Clean the Combustor ModuleCatalytic Combustor Remove the Combustor Module20005004 ModelsUVS27R, UVS27M Vent Free Gas Heaters Vermont Castings UVS27 Vent-FreeGas Heater20005004 UVS27R, UVS27M Vent Free Gas HeatersModels 3030, 3031, 3032, 3033 continued Vermont Castings UVS27 Vent-FreeGas HeaterShell Enamel Part Numbers - Hearthmount UVS27R, UVS27M Vent Free Gas HeatersVermont Castings UVS27 Vent-FreeGas Heater Models 3030, 3031, 3032, 3033 continuedGlass / Catalyst Kit UVGODCFK Optional Accessories AvailableRemote Controls Fan KitsVermont Castings UVS27 Vent-FreeGas Heater LIMITED LIFETIME WARRANTYPRODUCT COVERED BY THIS WARRANTY IF WARRANTY SERVICE IS NEEDED…