Vermont Castings UVS27
Optional Accessories Available
Fan Kits
FK28 Fan Assembly
The FK28 fan kit helps distribute heated air from within the firebox out into the room. The fan is controlled by a snapstat that turns power on and off as the firebox temperature rises above and falls below a preset temperature. A rheostat provides for variable fan speeds.
Specifications
115 Volt / 60Hz / .75 Amps
Maintenance
The fan itself does not require regular maintenance, however periodic cleaning of the fan and the surround- ing area is required.
Installation
Refer to Assembly Section, Page 10 for installation instructions.
Glass / Catalyst Kit UVGODCFK
The glass panel replaces the standard screen. The catalytic combustor installs easily into the upper mani- fold above the firebox.
Remote Controls
The remote control allows you to turn the heater on or off from anywhere in the room. Remote controls are available for the UVS27R only. Refer to Figure 17, Page 12 for wiring diagram.
Model | Function/s Controlled |
MRC1 | ON/OFF |
MRC2 | ON/OFF and Temperature |
MRC3 | ON/OFF and Temperature control |
| with a digital display and a pro |
| grammable 24 hour clock |
IMT | Wall mounted thermostat control |
|
|
| Warming Shelf |
|
|
Warming shelves add versatility to your stove. The warming shelf can be used to keep foods warm at mealtime.
Model |
| |
Pinnacle | Stardance |
|
Shell | Shell | Color |
2702 | 2702 | Classic Black |
n/a | 2704 | Red |
n/a | 2706 | Green |
n/a | 2711 | Moonlight Blue |
2764 | 2764 | Sand |
2765 | 2765 | Midnight |
The shelf installation is done in three stages. First you attach the shelf loosely to the stove, leaving the screws loose enough to allow final adjustments. Then, you position the shelf and adjust the brackets so the shelf fits correctly. Finally, you tighten the screws.
Refer to the instructions included with each warming shelf for complete installation procedures.
20005004 | 25 |