BURNER REMOVAL AND INSTALLATION :
REMOVAL :
1.Slide the burner to the left and pull toward you.
2.To gain access to the fan, also remove the firebox bottom plate.
INSTALLATION :
1.Put the bottom plate back in place.
2.Put the burner assembly back in the firebox and push to the right until it touches the firebox side. Make sure the main orifice is inserted in the venturi tube by looking through the square hole as shown. A silicone washer insures air tightness between the two parts.
WARNING : NEVER OPERATE THE GAS INSERT WITHOUT HAVING THE ORIFICE PROPERLY INSERTED EN THE VENTURI TUBE. THIS WOULD RESULT IN SERIOUS DAMAGE TO THE GAS INSERT AND IS A SERIOUS RISK OF FIRE.
12