FACE PLATE ASSEMBLY AND INSTALLATION :
ASSEMBLY :
1.Bolt the face plate top piece to the left piece using two
(B).
2.Place both louver assemblies in position with their pivot rod inserted through the face plate side pieces holes (C). The top and bottom louvers are clearly identified.
WARNING : Do not invert the top and bottom louver assemblies, this would damage them because top louvers can withstand to higher temperature. They are marked with stickers at one end.
3.Bolt the face plate left piece to the top using the other two
4.Assemble the decorative gold trim using the two corner brackets (A).
5.Slide the assembled decorative gold trim in place from above the face plate.
6.Insert the switches in the slots located on the right side of the gold trim (E) and
(F).
14