Drolet 7000 MVRLC, 36C03U TYPE 139 manual Do Not Modify This Appliance

Page 4

WARNING

*INSTALLATION SHOULD BE DONE BY A QUALIFIED INSTALLER.

*DO NOT BURN WOOD OR ANY OTHER MATERIAL IN THE GAS INSERT.

*HOT WHEN IN OPERATION. KEEP, FURNITURE, CLOTHING AND FLAMMABLE MATERIAL AWAY FROM THE APPLIANCE.

*ADVISE ADULTS AND CHILDREN TO THE HAZARD OF HIGH SURFACE TEMPERATURES AND THAT THEY SHOULD STAY AWAY TO AVOID BURNS OR CLOTHING IGNITION.

*YOUNG CHILDREN SHOULD BE SUPERVISED WHEN THEY ARE IN THE SAME ROOM AS THE APPLIANCE.

*THE APPLIANCE SHOULD BE INSPECTED BEFORE USE AND AT LEAST ANNUALLY BY A QUALIFIED SERVICE PERSON. MORE FREQUENT CLEANING MAY BE REQUIRED DUE TO EXCESSIVE LINT FROM CARPETING, DUST, BEDDING MATERIAL, ETC.

*IT IS IMPERATIVE THAT THE CONTROL COMPARTMENTS, BURNERS AND CIRCULATING AIR PASSAGEWAYS BE KEPT CLEAN.

*DO NOT MODIFY THIS APPLIANCE.

*THE LOUVER OPENINGS ON THE GAS INSERT FACE PLATE SHOULD NEVER BE BLOCKED.

*PROVIDE ADEQUATE ACCESSIBILITY CLEARANCES FOR SERVICING AND PROPER OPERATION.

3

Image 4
Contents INSTALLATION AND OPERATING INSTRUCTIONS FOR YOUR SAFETYFIREPLACE GAS INSERT FOR YOUR SAFETYTABLE OF CONTENTS GENERAL INFORMATION KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCEDO NOT MODIFY THIS APPLIANCE SPECIFICATIONS TOP, SIDE AND FRONT VIEWS INSTALLATION 11.Secure the liner to the 4” connector on the top of the ULTRA FLAME with three metal screws WARNING DO NOT USE OPEN FLAME TO CHECK LEAKS Distance between valve 25.Install a cap on the liner GLASS FRONT REMOVAL CLEANING AND INSTALLATION BURNER REMOVAL AND INSTALLATION LOG INSTALLATION FACE PLATE ASSEMBLY AND INSTALLATION INSTALLATIONS REFRACTORY PANELS INSTALLATIONS EMBERS KIT INSTALLATIONSSHUTDOWN INSTRUCTIONS OPERATING INSTRUCTIONS LIGHTING INSTRUCTIONSFAN OPERATION MAINTENANCE INSTRUCTIONS PILOT BURNER ADJUSTMENTREPLACEMENT PARTS OPTIONAL PARTSLIMITED 5 YEARS WARRANTY