Regency Wraps F38-NG2, F38-LPG2 GAS Connection, GAS Pipe Pressure Testing, Flueing Requirements

Page 7

INSTALLATION

Flueing Requirements

A100mmdiameterflueisrequired. Forcosmetic or aesthetic purposes 6" outer fl ue can be used as long as an approved inner fl ue is installed. Fasten but do not penetrate the inner sleeve of the fl ue when tightening the screw.

The minimum fl ue required is 3.3m from fl oor level.

Follow all fl ueing manufacturer’s requirements and local building codes or AS5601-2004.

GAS CONNECTION

The gas line should be rigid pipe. Copper may also be used if approved by AS5601-2004.

The gas connection at the valve is 1/2 male. For minimum and maximum supply pressure see the System Data Table.

GAS PIPE PRESSURE

TESTING

The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig. (3.45 kPa). Disconnect piping from valve at pressures over 3.45 kPa (14" w.c.).

Themanifoldpressureiscontrolledbyaregulator built into the gas control, and should be checked at the pressure test point.

Note: To properly check gas pressure, both inlet and manifold pressures should be checked using the valve pressure ports on the valve.

1)Make sure the valve is in the "OFF" posi- tion.

2)Loosen the "IN" (# 7) and/or "OUT" (# 6) pressure tap(s), turning counterclockwise with a 1/8" wide fl at screwdriver.

3)Attach manometer to "IN" and/or "OUT" pressure tap(s) using a 5/16" ID hose.

4)Light the pilot and turn the valve to "ON" position.

5)The pressure check should be carried out with the unit burning and the setting should be within the limits specifi ed on the safety label.

6)When fi nished reading manometer, turn off the gas valve, disconnect the hose and tighten the screw (clockwise) with a 1/8" fl at screwdriver. Screw should be snug, but do not over tighten.

S.I.T. Valve Description

1)Gas on/off knob

2)Manual high/low adjustment

3)Pilot Adjustment

4)Thermocouple Connection

5)Main Operator

6)Outlet Pressure Tap

7)Inlet Pressure Tap

8)Pilot Outlet

9)Main Gas Outlet

10)Flange Securing Screw Holes

11)Alternative TC Connection Point

12)Thermoelectric Unit

13)Additional Valve Mounting Hole

System Data

F38-2

F38-NG2: For 0 to 610 meters altitude

F38-LPG2: For 0 to 610 meters altitude

Burner Inlet Orifi ce Sizes:

 

 

NG

LPG

Burner

#33

#52

 

 

 

Max. Input

 

 

NG

38 mj

 

LPG

31 mj

 

 

 

 

Min. Input

 

 

NG

24.1 mj

 

LPG

24.5 mj

 

 

 

 

Supply Pressure

 

 

NG

1.74 kPa

 

LPG

2.99 kPa

 

 

 

 

Manifold Pressure

 

 

NG

0.87 kPa

 

LPG

2.65 kPa

 

Electrical: 240 V. 50Hz.

Circulation: High/Off/LO speed fan, 150/89 CFM.

Log Set: Ceramic fi ber, 7 per set.

Aeration Setting

NG Full Open

LPG 6.4 mm

Flue Restrictor Setting

NG Full Open

LPG Full Open

Regency F38-2 Freestanding Gas Heater

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Please Keep These Instructions For Future Reference ManualTo the New Owner Table of Contents Safety Label Before YOU Start InstallationGeneral Safety Information General InformationFlueing Installation ChecklistClearances to Combustibles Draft DiverterT. Valve Description GAS Pipe Pressure TestingGAS Connection Flueing RequirementsReverse steps 3 to Conversion KIT# 731-968 from NG to LPGLPG Conversion Kit Contains Qty #52 and tightenLOG SET Installation Aeration AdjustmentF38-2 with 38 mj E02-45 F02-47 A02-65 D02-46 B02-56 C02-44 Test for Flue Spillage Front Door Installation14 GA 15.24 16 GA 18 GA 20 GA 22 GA Final CheckWiring Operating Instructions Copy of the Lighting Plate Instructions For Your Safety Read Before LightingNormal Operating Sounds GAS Appliances Pilot AdjustmentMaintenance Withoutthefanaccesspanelsecurely Place and correctly sealed FAN MaintenanceInstalling Glass Install door catch plateRemoving Valve F38-2 Main Assembly Parts ListPart# Aust. New Zealand Description F38-2 Burner & LOG Assembly Description F38-2 Door AssembliesWestern Australia Eastern Australia Warranty

F38-NG2, F38-LPG2 specifications

Regency Wraps is known for its innovative approach to creating stylish and functional clothing storage solutions. Among their notable offerings are the F38-NG2 and F38-LPG2 garment bags. These bags blend practicality and aesthetics, catering to the needs of individuals looking to store and transport their garments with care and style.

The F38-NG2 is designed with a focus on durability and protection. Made from high-quality nylon fabric, it provides excellent resistance to wear and tear while also being lightweight for easy handling. One of the key features of this garment bag is its spacious interior, allowing users to store multiple garments without worrying about creasing or damage. The innovative design includes breathable ventilation that helps prevent odors and keeps clothes fresh during travel or storage. Additionally, the translucent window enables quick visibility of the contents, eliminating the hassle of searching through a packed bag.

On the other hand, the F38-LPG2 caters to a slightly different demographic with its luxurious polyester fabric. This elegant material not only enhances the bag’s aesthetic appeal but also adds a layer of protection against dust, dirt, and moisture. The F38-LPG2 is particularly well-suited for formal attire, such as evening gowns and suits. Its padded interior offers extra cushioning for delicate fabrics, ensuring that garments remain in pristine condition. Like its counterpart, this bag features a convenient clear window, allowing users to identify garments at a glance.

Both the F38-NG2 and F38-LPG2 incorporate advanced technologies, such as anti-static linings. These linings help reduce static cling, providing an extra level of care for garments made from synthetic materials. Additionally, both bags come with sturdy zippers and reinforced handles for enhanced durability, ensuring that they can withstand the rigors of frequent use.

In conclusion, the Regency Wraps F38-NG2 and F38-LPG2 garment bags are ideal choices for individuals seeking quality and functionality in their clothing storage solutions. With their thoughtful designs, high-quality materials, and protective features, these bags are perfect for traveling, seasonal storage, or simply keeping your wardrobe organized. Whether you prefer the rugged advantage of the F38-NG2 or the sophisticated elegance of the F38-LPG2, both options reflect Regency Wraps' commitment to quality and innovation in garment care.
Top Page Image Contents