AT&T 3.0 manual Testing Music On Hold, Make an announcement into the handset

Testing the System

2Make an announcement into the handset.

You should hear the announcement over the loudspeaker(s).

3Hang up.

4Repeat Steps 1 through 3 for all paging zones.

Testing Music On Hold

To verify that music is provided to outside callers placed on hold, follow the steps below. Inside callers do not hear Music On Hold.

1Pick up the handset at the test telephone.

2Dial the central office trunk access code and the system’s published directory number; or, if you are using a DID trunk, dial any extension.

3At the destination extension, answer the incoming call.

4At the destination extension, press the Hold button. The line button’s green LED should flash.

5Verify that music is heard at the destination extension and adjust the volume as required.

6Hang up.

NOTE:

If the customer uses equipment that rebroadcasts music or other copyrighted materials, the customer may be required to obtain a copyright license and pay license fees from a third party such as the American Society of Composers, Artists, and Producers (ASCAP) or Broadcast Music Incorporated (BMI). Or the customer can purchase a Magic on Hold system, which does not require the customer to obtain such a license, from an AT&T representative.

Initializing and Testing the System 7–17