AT&T 3.0 manual Adjust the deskstand height. See Figure, Power up the telephone. See Figure

Installing Multi-Function Modules

Pull Up

Press

Center Tab

	Card
Deskstand	Tray

Telephone

Base

Line

Cable

Figure 3-18. Adjusting the Deskstand Height

11 Adjust the deskstand height. See Figure 3-18.

aTo change the deskstand’s height from low to high, press the top rear center of the deskstand to release the tab.

bPull the deskstand up and insert the tab into the slot in the module cover.

cTo readjust the stand, see the instructions on the bottom of the card tray.

12 Power up the telephone. See Figure 3-19.

aPlug the D8W cord from the telephone into the 8-conductor (large) modular jack of the 400B or 400B2 adapter.

3-20Installing Telephones and Adjuncts