AT&T 3.0 manual 6COA DS1

Error Logs

Table 2-2 Continued
	Error
	Codes Description				Action
	6COA	DS1	SLIP	ALARM:	Troubleshoot the T1 trunk. If problem
		Slip	count	reached 88.	persists, escalate to your technical
					support organization.
					Maintenance →Slot →Error Events →
					Current hr

6C0B DS1 HARDWARE INOPERATIVE:

DS1 hardware is not operating properly. If this is the only 100D (DS1) module, or if this is the module designated to have the active clock, its TDM bus clock generator was not activated.

If problem persists, escalate to your technical support organization.

7001	PRI SVC AUDIT TIMEOUT:	Troubleshoot the PRI trunk and report to
		service provider; otherwise, no action
		required. If problem persists, contact
		your technical support organization.
7002	PRI SVC STATE INCONSIST:	Troubleshoot the PRI trunk and report to
		service provider; otherwise, no action
		required. If problem persists, contact
		your technical support organization.
7003	PRI D-CHNL INOPERATIVE:	Troubleshoot the PRI trunk and report to
		service provider; otherwise, no action
		required. If problem persists, contact
		your technical support organization.
7004	PRI B-CHNL RELEASED:	Troubleshoot the PRI trunk and report to
		service provider; otherwise, no action
		required. If problem persists, contact
		your technical support organization.

Continued on next page

Error Logs, Access Logs, and System Inventory 2-11