Connecting a Printer to the Control Unit

Connecting a Printer Within 50 Feet (15.2 m)

If the printer is within 50 ft. (15.2 m) of the control unit and is connected to the same 117-V AC branch as the control unit, use this procedure to connect a printer to the control unit.

You need the following hardware for this procedure:

Z200A EMI filter

Adapter for the connector on the interface cable

355A for a male connector

355AF for a female connector

Installing the PC, CAT, or Printer 5-15

Page 174
Image 174
AT&T 3.0 manual Connecting a Printer Within 50 Feet 15.2 m