AT&T 3.0 manual Card Missing or Card Not Inserted Correctly, Restore Messages

Backing Up with a Memory Card

Console Display/Instructions Additional Information PC

9 Observe the restore file validation screen.

Restore n:

Restore Successfully

Completed.

System is Restarting.

Please Wait.

n = filename selected in Step 5

The session is finished, and the system restarts. You must enter system programming again to continue

Restore Messages

During the restore procedure, additional screens may appear to alert you to problems with the translation memory card, the backup file or the restore procedure. This section contains displays of each screen and information about what to do if the screen appears.

Card Missing or Card Not Inserted Correctly

Memory Card Restore: Verify that Memory Card has been inserted correctly.

Exit

The memory card is either not inserted or inserted incorrectly. The restore is aborted. You must reinsert the card and repeat the restore procedure. This screen may also appear if the wrong type of memory card is inserted and a restore is requested within one minute of insertion. Verify that the card is a translation memory card.

D–22Maintenance and Troubleshooting