AT&T 3.0 manual Error Codes Descrption Action, 7404

Error Logs

Table 2-2 Continued
	Error
	Codes	Descrption				Action
7404		STUCK	RINGING:			Test the trunk with a single-line
		Communication			problems between	telephone. If the problem is not in the
		the module and			central office.	trunk, replace the module with one that is
		If this error occurs twice				known to be working. If the problem is
		consecutively, the trunk is busied-				gone when using the known good
		out automatically, whether Automatic				module, replace the module and restart.
		Maintenance-Busy is enabled or not.
	7801	NOT IN NORMAL OP MODE:				Reset the board. If problem persists,
		Module not in normal operation				troubleshoot	the module.
		mode.	Reported		in background	Maintenance	→Slot →Slot Number →Reset
		module	check.
7802		SANITY	INT NOT		GENERATED:	Reset the board. If problem persists,
		Only applies to modules that have				troubleshoot	the module.
		extension		jacks.
7803		NO PORT		BOARDS	AVAILABLE:	No action required. Delete this entry from
		This error is reported when modules				the transient	log.
		are not	present.

7804 INVALID SANITY RESPONSE:

This error occurs when a sanity test gets invalid responses. Applies only to modules that have extension jacks.

Reset the board. If problem persists, troubleshoot the module.

7805 INVALID SLOT NUMBER: Rarely occurs.

Software could not process an event detection because the slot number was invalid.

No action required; however, if problem persists, restart the system.

Continued on next page

Error Logs, Access Logs, and System Inventory 2-13