AT&T 3.0 manual Connecting One or More DSSs, Wire the telephone to the DSS units. See Figure

Installing Direct Station Selectors

D8W	D8AC
	Dss

MLX Telephone		DSS 1	DSS 2
	D8W	D8AC

MLX Telephone DSS 1 Dss 2

Figure 3–28. Connecting One or More DSSs

4 Wire the telephone to the DSS unit(s). See Figure 3-28.

aRemove the handset from the telephone, then place the telephone face down on a flat surface to the right of the upside-down DSS unit(s).

bPlug the D8AC cord from the IN jack on the DSS1 into the DSS jack on the telephone; then route the cord through the cord channel.

cPlug the D8W line cord into the LINE jack on the MLX telephone. The D8AC and D8W cords share the cord channel on the telephone.

Installing Telephones and Adjuncts 3-45