AT&T 3.0 manual Routing the Cord Through the Backplate, Label the button assignment card

Assembling MLX Telephones

D8W

❑

Mounting

Plate 6306

Figure 3-38. Routing the Cord Through the Backplate

fPlug the free end of the cord into the LINE jack on the back of the telephone. Route the cord through the cord channel above the jack. See Figure 3-38.

gPosition the telephone on the mounting plate studs and then slide the telephone down to lock it in place. To remove the telephone, slide it up and off.

8 Label the button assignment card.

a Pull the tab at the top of the plastic cover toward you.

3-56Installing Telephones and Adjuncts