AT&T 3.0 manual Setting Up Equipment for Remote Maintenance, Connect the PC and modem

Remote Programming Maintenance

Setting Up Equipment for Remote

Maintenance

To setup equipment for remote maintenance, follow the steps below while referring to Figure 1–3 and to Installation.

1Connect the PC and modem.

■If you have an external modem, use an EIA-232-Dcable.

■If you have an internal modem, the connection is already established.

2Use a D8W cord to connect the modem to a T/R trunk jack.

3Use a D8W cord to connect the modem to a T/R telephone.

T/R jack

	D8W cord
LINE jack	PHONE jack

EIA-232-D

EXTERNAL

M O D E M

PC running SPM \

D8W cord

T/R telephone

Figure 1-3. External Modem Setup

Introduction 1-7