AT&T 3.0 manual 100D Module Problems, Upgrade Attempted on an Empty Slot

100D Module Problems

Upgrade Attempted on an Empty Slot

Console Display/Instructions Additional Information PC

Upgrade Slot xx: No module in slot.

xx = slot selected in Step 3.

Exit

Select Exit and repeat the upgrade procedure, being careful to select the correct slot.

Board Memory Programming Failure

Upgrade Slot xx:

Board Memory Programming

Failure.

Upgrade CANCELED. Upgrade INCOMPLETE.

xx= slot selected in Step 3.

Exit

Repeat the upgrade procedure. If the upgrade continues to fail after several attempts, the module should be replaced. See “Replacing the Module. ”

100D Module Problems

The 100D module requires the CSU Loopback Test, in addition to the other module tests, See Figure 4–6for a diagram of the entire module testing process. If you have any questions about the 100D module that this section does not cover, contact your technical support organization.

4-70Control Unit Problems