AT&T 3.0 manual Using SPM, Starting SPM, With a Direct Local Connection, Press any key

\Using SPM

Using SPM

For more information on using SPM, see System Programming and Maintenance.

Starting SPM

The procedure for accessing SPM differs slightly, depending on whether your PC is connected directly or by modem to the control unit.

With a Direct Local Connection

To access SPM when your PC is connected directly to the control unit, follow the steps below.

1If you do not have a hard drive, insert the SPM diskette into Drive A and switch to Drive A if it is not already the current drive.

2Start the SPM program.

Type SPM. The SPM Welcome screen appears, as shown below.

Console Display/Instructions Additional Information PC

3 Press any key.

Welcome to SPM The MERLIN LEGEND System Programming

&Maintenance Utility Please press any key

to continue: Version X.xx

If the main menu (see Step 4) does not appear, or if the information on the screen is garbled, press any key again.

4 Select an option by pressing one of the function keys.

	SPM Main Menu
	Menu: Select	Function
(F1)	Sys Program	Maintenance
(F2)	Backup	Restore
(F3)	Boards	Pass-Thru
(F4)	Print Opts	Password
(F5)	Monitor	Language

(F6)

(F7)

(F8)

(F9)

(F10)

1-8Introduction