AT&T 3.0 manual Video Conferencing Data Stations, Acculink 3150 CSU

Video Conferencing Data Stations

Video Conferencing Data Stations

You can use the 7500B data module with a Multipurpose Enhancement Board for synchronous data communication. This type of station allows data transmission at speeds of 56 or 64 kbps.

This section is only a guideline for connecting video conferencing equipment to the system. For additional information, refer to the documentation packaged with the video codec.

Also, for instructions on using the Multipurpose Enhancement Board or for additional information on setting up the 75006 data module, see the documentation packaged with the 75006 data module.

You need the following hardware:

008 MLX module or 408 GS/LS-MLX module and a 100D module in the control unit

ACCULINK 3150 CSU

Two 7500B data modules with two 7500B data module feature package 2 upgrades (user manuals included)

Two Multipurpose Enhancement Boards [install one of these in each 7500B data module for synchronous communication and an RS-366 Automatic Calling Unit (ACU) interface]

Two WP901 10-L7 power supplies (one per stand-alone 7500B)

Two 440A4 terminating resisting adapters

Z77A multiple mounting (mounting for multiple 7500B data modules)

PictureTel video codec unit

Two Shore Microsystems SM-100EIA-232/V.35 converters (or equivalent)

6-16Connecting Data Equipment