AT&T 3.0 manual Wiring for Auxiliary Power

Installing Direct Station Selectors

	AC Power
Wall Jack	O u t l e t
		I* I
	- - - -
	D 6 A P

Power

Supply

400B2 Adapter

D 8 W

DSS

Figure 3–29. Wiring for Auxiliary Power

5Turn the telephone and the DDS unit(s) faceup with the telephone now to the left of the DDS unit(s). See Figure 3-29.

6Insert one end of the coiled H4DU handset cord into the handset and the other end into the jack on the side of the telephone.

7If auxiliary power is not required, plug the D8W cord into the wall jack and then go to Step 9.

8If auxiliary power is required, refer to the following steps and Figure

3-29. The combined total length of the D6AP and D8W cords you use must not be more than 50 ft. (15 m).

a Plug the D8W cord from the telephone into the 8-conductor modular jack of the 400B or 400B2 adapter.

3-46Installing Telephones and Adjuncts