AT&T 3.0 manual Adjusting or Removing the Deskstand, Remove or adjust the deskstand. See Figure

Assembling MLX Telephones

Pull Up a n d Away

Press

Center Tab

Figure 3-30. Adjusting or Removing the Deskstand

To assemble an MLX telephone, follow the steps below.

1Remove or adjust the deskstand. See Figure 3-30.

■If you want to leave the deskstand in the low position, go to Step 2.

■If you want to adjust the angle of the deskstand, or remove it in order to wall-mount the telephone:

aPlace the telephone face down on a flat surface.

bPress on the top rear center of the deskstand to release the tab, then pull it up towards you.

cInsert the tab into the slot in the module cover to adjust the height.

dTo remove the deskstand, continue to pull it up and away from the telephone.

e Release the deskstand from the front slot.

Installing Telephones and Adjuncts 3-49