AT&T 3.0 manual Reset Summary, Console Display/Instructions Additional Information P C

Module Problems

The screen below appears when the busy-out fails again; be sure to specify the correct slot.

Console Display/Instructions		Additional Information P C
	Busy-Out Slot xx:	xx = slot number entered in Step 2
	Busy-out FAILED

Exit

Reset

Summary

Procedure

PC Procedure

Appropriate Modules Time Estimate

Menu →Maintenance →Slot →Dial the slot no. →Enter →Reset →Yes.

(F6) →(F2) →Type the slot no. →(F10) →(F7) →(F1) Any module that you are about to test

Less than 1 second (all calls in progress are terminated or put on hold immediately). If you do not want to interrupt calls in progress, use Busy-Out instead of Reset, as described above.

To reset the module, follow the steps below.

1 From the Maintenance menu, select the Slot option.

Maintenance

Make a selection

System

Slot

Port

Exit

(F2)

4-40Control Unit Problems