AT&T 3.0 manual Module Error, Select Exit and reinitiate the upgrade procedure

upgrade canceled or upgrade

Module Problems

This procedure can only be run on the 800 GS/LS-lD module or modules introduced after Release 3.0. Select Exit and repeat the upgrade procedure, being careful to select the correct slot. If

incomplete appears on the error screen, the circuit module may be unreliable or unusable until a successful upgrade is performed on it.

Module Error

Console Display/Instructions Additional Information P C

Upgrade Slot xx: Module error

xx = slot selected in Step 3.

Exit

Select Exit and reinitiate the upgrade procedure.

Upgrade Slot xx: Module error

Upgrade CANCELLED. Upgrade INCOMPLETE.

xx= slot selected in Step 3.

Exit

Select Exit and reinitiate the upgrade procedure.

4-68Control Unit Problems