AT&T 3.0 manual RJ21X Wiring Field Tools

Wiring

AT-8762D lmpact Tool

110 Impact Tool

788J1

Spudger

788 K1 Retainer T o o l

Modular Plug Pressers

Figure 4-3. RJ21X Wiring Field Tools

To connect the RJ21 X network interface to the control unit, follow the steps below. Figure 4–3 shows the tools you need.

1For each piece of hardware, drill two diagonally opposite holes into the backboard, allowing for a 1/16-inch (1.6 mm) space between each piece of hardware.

2 Mount the wire troughs and the termination blocks.

There is a wire trough above and below each termination block.

Connecting the Control Unit to the Network Interface 4-7