Connecting drain hose

1.Slightly hit the hole, for drain hose, with your hands or hammer.

2.Insulate the drain hose with drain insulation tube and fix it with tape.

3.Direct the drain hose downward to establish natural draining. -- Make sure to check for proper drainage after connection

• Fix the drain hose tightly to prevent any water leakage.

CAUTION • Do not use the extended drain hose.

-- Since water may leak from the connection part, make sure that you do not extend the drain hose. However, if extension is unavoidable due to its short length, use silicone sealant to securely seal the connection to prevent leakage. (Do not use the insulation tape.)

Drain hose

Duct drainage [Polypropylene(PP)]

Insulation (foamed polyethylene)

Connection drain hose

ENGLISH

Connect the drain hose through the upper hole for drain hose.

Upper hole for a drain hose Drain hose

mm410 Piping

Hole for piping connection

• Connection with wire-concealed piping

Incorrect installation

Upper hole for a drain hose Drain hose (U-TRAP)

Piping

Hole for piping connection

• Make sure the U-TRAP does not occur. Water may overflow and cause property damage.

CAUTION

45

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 45

2014-03-12 오전 9:33:15

Page 46
Image 46
Samsung AF28FSSDADFNMG, AF28FSSDAWKNFA manual Connecting drain hose, Fix the drain hose tightly to prevent any water leakage