Samsung AF28FSSDADFNMG, AF28FSSDAWKNFA, AF27FSSDAWKNER manual Troubleshooting, Problem, Solution

Troubleshooting

Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM	SOLUTION
The air	• Check power status and then operate the air conditioner again.
conditioner	• Switch on the circuit breaker and then operate the air conditioner again.
does not work	• Check if the air conditioner is turned off by Off timer or Smart sensor.
at all.	Operate the air conditioner again by pressing the Power	button.
Front panel	• Check if there is a power failure.
	• Check if there is any object blocking the front panel from closing.
remains open.
	Remove the object and then operate again.
The temperature	• Check if you have selected Turbo/Purity mode. In these modes,
adjustment is	temperature adjustment is not available.
not working.
	• Check if the set temperature is higher (in Cool mode)/ lower (in Heat
	mode) than the current temperature. Press the Temp + or - button
	to set the temperature lower (in Cool mode)/ higher (in Heat mode
	than the current temperature.
	• Check if the Full HD Filter is blocked by dirt. If there is a lot of dust
	on the Full HD Filter, cooling (heating) performance may decrease.
	Clean them frequently.
	• Check if the outdoor unit is covered or installed near the obstacle.
	Take the cover off and take the obstacle away.
	• If you want to operate the air conditioner in the sunlight, cover the
Cool air does not	outdoor unit using curtains or etc.
	• If ice is formed on the outdoor unit during the heat mode, warm
come out of the
air conditioner.	breeze will not be generated. The defrost operation will start
	automatically.
	--The defrost operation time may change depending on the status of
	ice formation.
	• If the doors or windows are open, it may cause poor cooling
	performance. Close the doors and windows.
	• If you have selected Purity mode without selecting other mode, cool
	air does not come out of the air conditioner. Press the Mode button
	to select other mode.
	• Check if the pipe length is too long. When the pipe length exceeds
	maximum allowable pipe length, cooling (heating) performance
	may decrease.
	31

ENGLISH

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 31 2014-03-12 오전 9:33:09