AT&T 3.0 manual Wrong Type of Card, Board Mismatch

Backing Up with a Memory Card

If the restore fails because the card is damaged, the system performs a System Erase (frigid start). Repeat the restore procedure using a different file and/or memory card.

Wrong Type of Card

Memory Card Restore: Inserted Memory Card is not the correct type. Remove and insert MERLIN LEGEND Backup/Restore Card.

Exit

The inserted card does not match the card option selected from the System menu. Remove the card and repeat the restore procedure with the correct type of card. See “Card Types” for information about the card labels.

Board Mismatch

Console Display/Instructions

Restore x:

Restore Failure

RESTORE IS CANCELED. Board mismatch between control unit and file.

Exit

Additional Information PC

x = filename selected

A mismatch exists between the hardware components present on the current system and the hardware components reflected in the backup file, The restore is aborted. You can do one of the following:

■Repeat the restore procedure with another file.

■Modify the system hardware to match the configuration of the backup file and repeat the restore procedure with the same file.

Maintenance and Troubleshooting D-25