Conclusion of Hardware Maintenance

After about four minutes, check the error logs.

■If new PRI errors occur, contact your technical support organization for help on interpreting the results and your action.

■If no new PRI messages appear, the ends are most likely in agreement.

The screen below appears when the message cannot be sent.

BChannel xxxx Audit call

Audit Failed

xxxx= slot and port number entered in Step 3.

Exit

If this occurs, make sure an active call is in progress on the specified B-channel and try the audit again.

Conclusion of Hardware

After you have completed maintenance and troubleshooting on Release 2.1 or later, follow the steps below to reinstall the control unit housing.

To install the top cover, see Figure 5-1and follow these steps.

1Be sure the cords have been pressed through the wire managers at the base of the modules.

5–30Central Office Problems