AT&T 3.0 manual Interpreting Test Results, Screen below smearsI

Module Problems

The screen below appears while the test is running. At the same time, if the module has a green LED, it flashes.

Console Display/Instructions Additional Information P C

Demand Test Slot xx:

Board aaaaaaaaaaaaaaaaaa Internal Loopback Test in Progress

Exit

xx= slot number entered in Step 2

If you are running the repetitive test, the screen remains until the test fails. To interrupt repetitive testing, select

Exit.(F5)

The screen below appears only if you selected Test Once and the module passes the test.

Demand Test Slot xx: xx = slot number entered in Step 2

Board aaaaaaaaaaaaaaaaaa

Internal Loopback Test

Successfully Completed

Exit

The screen below smearsI I			when either test (Test Once or Repetitive)
	Demand	Test Slot xx:		.	xx=slot number entered in Step 2
	Board aaaaaaaaaaaaaaaaaa
	Internal	Loopback Test
	FAILED				The 100D and 408 GS/LS-MLX

xxxxxxxxxxxxxxxxxxxxxxxxxmodule each have two DSEs. To

xx xx xx xx xx xx xx xx	display the second DSE’s test
Exit	results, press the More button.

fails.

(PgUp)

Lines 5 and 6 identify the cause of the failure or the number of errors found per DSE port. There are 16 DSE ports, numbered 0 through 15. Line 5 displays the results for ports 0 through 7; Line 6 is for ports 8 through 15.

Interpreting Test Results

If the test is successful, the module DSE ports are free from error. Continue with the next module test or restore the module if you are through testing.

4-48Control Unit Problems