Installing Adjuncts

MERLIN Identifier

MERLIN Identifier™ allows the use of local telephone company caller identification services to receive, store and use calling party number information. Before installation, verify that this service provided by the Central Office is available on the lines to be connected. Each MERLIN Identifier consists of the following:

A control unit, which must be located near the MERLIN LEGEND control unit

Up to four individual display units, which can be mounted on analog multiline telephones or wall-mounted for both analog and MLX telephones

An administrative keyboard

Optional equipment includes an administrative display, a PC, and a serial printer.

For detailed instructions, see MERLIN Identifier Installation and Administration.

When MERLIN Identifier is used with MLX telephones, a pair of installer-wired 104A termination outlets are required for each MLX set that is connected to a MERLIN Identifier display unit.

Modems

You can connect a modem to one of the following:

Single-line telephone

MLX telephone with an MFM

GPA and analog multiline telephone

3–34Installing Telephones and Adjuncts

Page 111
Image 111
AT&T 3.0 manual Merlin Identifier, Modems