AT&T 3.0 manual Phantom Modules, Xx = slot number entered in Step

System Inventory

The screen below displays information for slots other than Slot 00.

Console Display/Instructions Additional Information

P C

System Inventory: Slot xx

Board boardname Hardware Vintage: vv Firmware Vintage: vv

Exit

xx= slot number entered in Step 2

Press the More button to review information for each subsequent slot. When you reach the display for the last slot, pressing the More button redisplays the Slot 00 information.

(PgUp)

Phantom Modules

If the system includes a phantom module (an empty slot that has been programmed), the System Inventory screen does not recognize it. When replacing or adding modules, make sure phantom module slots remain empty, and that no modules are installed to their right.

2-22Error Logs, Access Logs, and System Inventory