AT&T 3.0 manual Resetting an RS-232 Port, Console Procedure, PC Procedure, → F1 → F3

Checking Ports

The screen below appears when Restore fails. If this occurs, exit and try again.

Console Display/Instructions Additional Information PC

Restore Station: xxxx

xxxx= extension number entered in Step 3

Restore FAILED

Exit

Resetting an RS-232 Port

The ADMIN (SPM) port is RS-232 Port 1, and the SMDR port is RS-232 Port 2.

Summary

Console Procedure	Menu →Maintenance →Port →RS232 Port 1 or RS232
	Port2 →Dial the dial plan no. →Enter →Reset →Yes
PC Procedure	(F6) → (F3) → (F3) or → Type the dial plan no. → (F10)
	→ (F1) → (F3)

To reset an RS-232 port, follow the steps below.

1 From the Maintenance menu, select the Port option.

Maintenance

Make a selection

System

Slot

Port

Exit

(F3)

5-20Central Office Problems