Chapter 4 Menus
1.The Motion Detector will sense any movement and turn on the LCD automatically.
2.You can use the function to change the sensitivity of Motion detector. (Off/ Slow / Medium / Fast).
Motion | 3. | Please use | or | to change to sensitivity of Motion | |
| Detector. |
|
|
| |
| 4. | The more sensitive (eg:Fast), the more easily for the | |||
|
| Re:control M207 to turn on its LCD. |
| ||
| 5. | You can use the function to change the consumption of | |||
|
| electricity. |
|
|
|
| 6. | Please press | to save your setting or press | to exit | |
|
| without saving the setting. |
|
| |
|
| ||||
| 1. There will be a welcome page when you first time use the | ||||
|
| Re:control M207 or reset it. |
|
| |
Welcome Page 2. Please use | or | to decide if you can | see the | ||
welcome page. (Enable/ Disable)
3.Please press 
to save your setting or press 
to exit without saving the setting.
1. Please use “Calibrate” to adjust the accuracy of LCD when you find the Re:control M207 is not so sensitive as before.
Calibrate 2. When you are calibrating the LCD, please press the place where a sigh “X” shows up.
3.Please refer to Chapter 5.5 for detailed information or press 
to exit without saving the setting.
1.When you want to reset your Re:control M207, please use
Reset | the function. It will erase all your settings in your remote. |
2.There will be a message to confirm your decision. If you really want to reset your remote, please tap “Yes”. Then you will reset it right away.
55
