Revox Recontrol M207 user manual Load the codes for the newly-added device, Pre-code

Re:control M207 User’s Manual

7.Finally, please decide how you will load the IR remote codes for the device. There are three choices for you: “Pre-code”, “Learning” and “Done”. More detail please refer to the following sections to get further understanding.

3.1.2 Load the codes for the newly-added device

When adding a new device successfully, you will be asked if you will load the codes for your device. There are two ways to load IR

remote codes for your newly-added device: “Pre-code” and

“ Learning”. Please choose one of these two ways to load the codes. If you don’t want to load any codes for the device, just select “Done” to finish the setting process.

A. Pre-code

The Re:control M207 is equipped with a mass pre-programmed code database. With the function, you are able to load the remote codes for your device. It also enables you to control the device even if you lose your original remote.

1.When you successfully add a new device, please decide if you continue to load the codes for the device. If you want to use “pre-code” to load the codes, please choose this item.

2.Please select the brand of your device. You just need to select the first letter of your brand. For example,n if your device belongs to Sony, please select “S” as your brand.

22