Revox Recontrol M207 user manual Turning the touch screen on, Precautions for using battery

Re:control M207 User’s Manual

1.3.1 Precautions for using battery

Please pay attention to the following instructions:

1.Be sure that the positive (+) and negative (-) polarities of each battery match the polarities indicated in the compartment.

2.Do not expose the batteries to excessive heat or flame.

3.Keep the batteries away from children.

4.Low power batteries will reduce the effective distance of the unit.

5.Do not mix different type of batteries or mix new and used batteries to use at the same time.

If you use Ni-MH rechargeable batteries, please pay more attention to the followings.

a.Before the first use, please charge the batteries for 10 hours.

b.Do not recharge the batteries with an unqualified charger.

c.When the battery low power warning icon appears, please recharge batteries right away.

d.Please renew the batteries immediately when its running time left is lower than half of preliminary after they are fully recharged.

Warning: When the battery low power warning icon appears, you may not enter the Setup Menu to operate the functions such as using learning function, adding a Macro, or deleting devices.

1.4 Turning the touch screen on

There are three ways to turn on

Re:control M207:

1.Picking up the Smart Remote: The motion detector design will turns the Re:control M207 on.

2.Pressing any rubber key.

3.Taping the LCD touch screen.

Figure 2-2: Turning the LCD on

6