Chapter 3 How to Set Your Re:control M207

4.Please choose two points from the blocks on LCD. A “v” sign will appear where you tapped. After you determine the second point, the key frame will show up on the screen automatically. Tap the frame to confirm the location.

If you want to relocate the points, you can press the button to quit.

a. The size of the key will depend on the points you choose.

b.You cannot setup a soft key that will overlap the adjacent keys.

5.Please select the shape for the new soft key. There are two choices for you: Rectangle and Ellipse. You can confirm your selection by

tapping the soft key or pressing the button.

6.After deciding the location, please name the key. (Please refer to

page 22 for name the key.) And then press the button to confirm your decision.

You can add new keys in every device together then input the

IR codes at the same time. You can use “Learning” function to get the corresponding remote code for your newly-added soft key at one time. Please refer to Chapter 3.8 Learning (P.37) for more information.

27

Page 30
Image 30
Revox user manual How to Set Your Recontrol M207