AT&T 3.0 manual Programming Guides, Restoring from the Translation Memory Card

Initializing the System

Programming Guides

The following guides are available to assist you:

Programming Summary for quick-reference procedures (document number 555-630-111)

System Programming for detailed procedures (document number 555- 630-140, in the binder accompanying this one)

System Programming and Maintenance (SPM) for detailed SPM procedures (document number 555-630-140, in the binder accompanying this one)

Restoring from the Translation Memory Card

If you received the Release 3.0 Translation memory card, follow the steps below to initialize the system:

1 Perform a System Erase (frigid start).

See Maintenance and Troubleshooting for detailed instructions.

Console Procedure: Menu →Maintenance →Slot →Dial or Type 00 →Enter → Demand Test →System Erase (Line 5, left button) twice →Yes

2Use the programming console and the translation memory card to perform the Restore procedure.

See Appendix D of Maintenance and Troubleshooting for instructions.

Restoring from the System

Programming Disk

If you received the Release 3,0 system programming disk, follow the steps below to initialize the system:

1 Perform a System Erase (frigid start).

See Maintenance and Troubleshooting for detailed instructions.

Console Procedure: Menu →Maintenance →Slot →Dial or Type 00 →Enter → Demand Test →System Erase (Line 5, left button) twice →Yes

7–2Initializing and Testing the System