AT&T 3.0 manual Supplemental Alerts, Supplemental Alert Adapter

Installing Adjuncts

Supplemental Alerts

Alerting devices notify people working in noisy areas of outside, transferred, and intercom calls. Connect an alert to one of the following:

■Single-line telephone

■MLX telephone with an MFM

■Supplemental Alert Adapter (SAA) and analog multiline telephone

Alerts compatible with the SAA include horns, bells, chimes, and strobes. See “Supplemental Alert Adapter” for installation instructions.

NOTE:

The MFM in SAA mode and SAA support devices operate on 48 V DC.

You can connect alerts operating on 20 through 30 Hz to an MFM in tip/ring mode or a single-line telephone jack.

Supplemental Alert Adapter

If the system forms indicate a bell, horn, chime, or strobe with an analog multiline telephone, follow the steps below to install an SAA. See Figure 3–27.

1Plug the telephone cord into the TELEPHONE jack on the SAA.

2Plug the cord from the alert device into the ALERTER jack on the SAA.

3Plug the cord from the telephone wall jack into the CONTROL UNIT jack on the SAA.

3-38Installing Telephones and Adjuncts